Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Stage subwoofer SUB-15 based on B&C 15PS100

Status
Not open for further replies.
B

BlackMamba

Guest
Newbie level 1


Project by kapitan planeta
Source and more photos here

Data:
Type: bass reflex
Capacity – 114 liters net
Tuning - 45Hz
Material –chipboard 18mm
damping-no (not necessary)
Passive filters -no (crossover needed)
Speaker - B&C 15PS100 8ohm, 700W rms
B&C SPEAKERS

Design:
B&C SPEAKERS
and necessary modifications (chipboard 18instead of 19, stiffener)

elements (chipbpoard 18mm)

Upper base -- 675 x 437 [mm]
Lower base -- 675 x 437
Left side -- 675 x 550
Right side -- 675 x 550
Rear wall -- 400 x 550
Front wall -- 400 x 450
Bass-reflex wall (horizontal)-- 400 x 382
Bass-reflex baffle -- 100 x 400

Finish:
Black matt nitrocellulose lacquer Nitromal sprayed with a spray gun with big nozzle.

 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top