Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Stability of DVB-S encapsulator software

Status
Not open for further replies.

Pinczakko

Full Member level 2
Full Member level 2
Joined
Jul 29, 2004
Messages
136
Helped
13
Reputation
26
Reaction score
0
Trophy points
1,296
Location
Taka Bonerate National Park, Indonesia
Activity points
1,592
I'm not experienced yet in development of encoder, encapsulator and the likes. Now, I'm conducting an IP-over-DVB (Internet Protocol over Digital Video Brodcasting) research. In this research, I have to make an encapsulator software that will encapsulate IP packets into an MPEG-TS (MPEG Transport Stream) to be transmitted into the satellite and also to be decapsulated in the receiver. Since I've never developed software like this before, I would like to know the factor that may affect the encapsulator stabilty and performance. Note that I developed the encapsulator in a PC running Linux and using a DVB transceiver card with a modulator.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top