Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SPI and XiP mode -with a microprocessor

Status
Not open for further replies.
B

balamani

Member level 1
Member level 1
Joined
Jan 11, 2013
Messages
38
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,554
Hi,

This is regarding the SPI interface and XiP (Execute in place) Mode.

1. Do all the SPI serial NOR Flashes support XiP mode?

2. Is there any requirement for a micro processor if it has to be connected to a SPI serial NOR flash with XiP mode support? i.e. let us consider a micro processor which can support SPI flash. If the selected SPI flash supports XiP mode, can the microprocessor communicate with that SPI flash? or the micro processor should have XiP enable feature in its architecture to support such SPI flash?

Please clarify in detail.
 

Any reply for this question ?

balamani said:
Hi,

This is regarding the SPI interface and XiP (Execute in place) Mode.

1. Do all the SPI serial NOR Flashes support XiP mode?

2. Is there any requirement for a micro processor if it has to be connected to a SPI serial NOR flash with XiP mode support? i.e. let us consider a micro processor which can support SPI flash. If the selected SPI flash supports XiP mode, can the microprocessor communicate with that SPI flash? or the micro processor should have XiP enable feature in its architecture to support such SPI flash?

Please clarify in detail.
Click to expand...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top