vishnu.mthss
Newbie level 6
- Joined
- Jan 3, 2011
- Messages
- 13
- Helped
- 2
- Reputation
- 4
- Reaction score
- 2
- Trophy points
- 1,283
- Location
- Bangalore
- Activity points
- 1,355
Hi,
Firstly, thanks for the time your spend on this thread.
Scenario at hand: I want to build a remote controlled toy-car: instead of a joystick in the remote, i need it to voice enabled. 6 predefined instructions (start, stop, front, back, left, right) from any of 2 persons only should be authenticated by the remote controller.
Is it possible to do this with TMS320C6713, or any such DSP for the speech processing part and a regular PIC for maneuvering the car?
Maximum delay is 2s from having spoken the command to the response of the toy-car.
I need to know if the DSP will have enough prowess to all the processing.
In addition to this, I want the communication to be wireless. I am planning to use a transceiver pair; will it work fine with the DSP and PIC?
Please reply at your convenience.
Firstly, thanks for the time your spend on this thread.
Scenario at hand: I want to build a remote controlled toy-car: instead of a joystick in the remote, i need it to voice enabled. 6 predefined instructions (start, stop, front, back, left, right) from any of 2 persons only should be authenticated by the remote controller.
Is it possible to do this with TMS320C6713, or any such DSP for the speech processing part and a regular PIC for maneuvering the car?
Maximum delay is 2s from having spoken the command to the response of the toy-car.
I need to know if the DSP will have enough prowess to all the processing.
In addition to this, I want the communication to be wireless. I am planning to use a transceiver pair; will it work fine with the DSP and PIC?
Please reply at your convenience.