ezbentley
Junior Member level 3
I am having problem with the netlist generated by spectre. In the Virtuoso schematic editor, I have a simple nmos with model name "nmos_rfw5" but the netlist shows:
NM0 (net5 net3 0 0) subcircuit
However, the correct netlist should be:
NM0 (net5 net3 0 0) nmos_rfw5
This error is preventing me from doing any work. Any help will be greatly appreciated. Thanks.
NM0 (net5 net3 0 0) subcircuit
However, the correct netlist should be:
NM0 (net5 net3 0 0) nmos_rfw5
This error is preventing me from doing any work. Any help will be greatly appreciated. Thanks.