intercooledgn
Newbie level 3
- Joined
- Mar 5, 2013
- Messages
- 4
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,315
I have a small project that I'm attempting to accomplish and have a few separate questions.
First I was looking at purchasing this kit from Radio Shack and am curious if a amplifier can be wired in if the sound isn't loud enough and if so how I would go about wiring a small amplifier into it.
**broken link removed**
Second I have this item and need to put together some bright LED lighting to the three sections of the octagon with symbols on them to have them light up. How would I go about wiring a series of LEDs in each of those sections and what parts should be purchased (circuit boards, LEDs, etc)
https://www.replicaprops.com/Light-from-behind-Key_p_93.html
I thank you all in advance for anyone who replies. Thanks again!
First I was looking at purchasing this kit from Radio Shack and am curious if a amplifier can be wired in if the sound isn't loud enough and if so how I would go about wiring a small amplifier into it.
**broken link removed**
Second I have this item and need to put together some bright LED lighting to the three sections of the octagon with symbols on them to have them light up. How would I go about wiring a series of LEDs in each of those sections and what parts should be purchased (circuit boards, LEDs, etc)
https://www.replicaprops.com/Light-from-behind-Key_p_93.html
I thank you all in advance for anyone who replies. Thanks again!