Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Source codes of Windows USB drivers

Status
Not open for further replies.

verilog_crack

Full Member level 2
Full Member level 2
Joined
Sep 6, 2003
Messages
134
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Location
In the Sky
Activity points
992
hi,
I need a good source code for usb driver at windows.
regards
 

Re: USB Driver

I believe usb drivers for bulk transfer mode are provided as examples as part of the DDK. Alternatively, the definitive book on writing wdm drivers is the one by Walter Oney. I think the attached cdrom comes with bulk transfer driver as well.
 

Re: USB Driver

Depending on your board manufacturer, USB drivers are provided on the Product CD. Oterwise XP SP2 should take care of your USB driver issues.
 

Re: USB Driver

Where can i find DDk And how can use it
 

Re: USB Driver

What kind of USB device? If it's HID compliant, you don't need to write a driver--just use Windows API calls to communicate with the device.
 

Re: USB Driver

Do you know a good resource for learning about Windows API calls and implementing a HID device ? a tutorial or e-book...


thanks
 

Re: USB Driver

For more HID information, go here: hxxp://www.lvr.com/hidpage.htm.

You will find example firmware and Windows applications in Visual C++ and Basic. There's a lot more on the web page.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top