Sony Ericsson DCU11 to DRC11

Status
Not open for further replies.
A

amila133

Member level 4
Joined
Oct 13, 2009
Messages
72
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Location
Sri Lanka
Visit site
Activity points
1,746
Hi,

I wanted to interface sony ericsson k700 phone to PIC using DRC11
(RS232) cable. But I was unable to find DRC11 cable in the market.

I have DCU11(USB) cable. I have schematic of DRC11 cable But not DCU11 cable. If you have some detail about DCU11 cable, please tell me and guide me to do this clearly.

Thanks............
 

Hi Amila, in my case I bought a DCU-11 cable I removed the usb to serial converter and only I used the mobile connector.


About phone connecor I've used pin 4 (Rx), pin 5 (Tx), pin 10(GND), and pin 11 (power)

 

    A

    amila133

    Points: 2
    Helpful Answer Positive Rating
Amila,
I mean have u tried what fiolin says by cutting off the USB head and take the TX and RX pns of the phone and connect to the PIC?Does it work cause I am stuck as i cant find a rs-232 cable for the phone.Thanks.
 

We should take RX, TX nad GND pin of the phone. then it works. If you want you can use just a connector of the USB data cable to connect above three pins.
Just cutting USB head and connecting RX,TX will not work.
regrds,
Amila
 

hi guys... well i'm doing the similar project as amilla and also use k700 in my project... using the max232 circuit and the dcu11 cable, i've tried to communicate to my phone using hyperterminal... but nothing show up... can anybody help me here? thanx in advanced... ^_^
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…