soldermask on silkscreen using Eagle

Status
Not open for further replies.
G

GowthamJGR

Newbie level 4
Joined
Mar 18, 2013
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Bangalore, India, India
Activity points
1,309
Hi I have the design file which have a part looks like the image attached
Can I make solder mask on Silkscreen using Eagle ?
Because it takes time to clean the silkscreen before soldering since the pads are covered by silkscreen
Do any body have idea to remove the silkscreen in the pad using eagle software

Thanks in advance
 

Assuming the cyan colour is the silk screen you need to re-draw the library part silk screen so that it is not on the pads. There is a ULP that may clear it from the pads but I have never used it.

Keith
 

keith1200rs said:
Assuming the cyan colour is the silk screen you need to re-draw the library part silk screen so that it is not on the pads. There is a ULP that may clear it from the pads but I have never used it.

Keith
Click to expand...

Yeah correct the cyan is the silk screen !
I need the open source logo printed in my board with the space for soldering (through hole)!
Tried silk.ulp from the given link it didn't work, I am using eagle 6.4.0, any way I used silk.ulp which is embedded into my version of Eagle
It draws the tnames as a silk screen, it didn't give me the effect of solder masked output :-(

looking for the option how it can be done ?

Thanks for the help
 

Simply edit your library part that is causing the problem. If that is your logo and you really want it on the PCB then move it to the solder resist layer - then it will show up but without causing any soldering problems.

Keith
 
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…