SOLDERING IRON TEMPERATURE CONTROLLER

Status
Not open for further replies.
Z

ziaulislam

Member level 4
Joined
Dec 14, 2007
Messages
75
Helped
13
Reputation
26
Reaction score
11
Trophy points
1,288
Activity points
1,668
soldering iron temperature

I am in need of mains (220V.45W) SOLDERING IRON TEMPERATURE CONTROLLER

Circuit Diagram ( I will Prefer SG3524 PWM cont I.C based Design with out complex

Ferrite Transformers) Discations on this topic also welcome.

Thanks !
 

soldering iron temperature control

No REPLY sad

Any thing gays.??????????????
 

soldering iron temperature controller

In my opinion using the soldering iron directly to a 220V it's complicate and dangerous, more common is a 24V unit. Some ideas here:
 
soldering iron temp controller schematic

Thanks! mister_rf

I think last one is good for me

after down loading Data sheets I can modifie

for 220V Iron.
 

temp controller soldering

mister_rf I can't find SP602 in Local market. will you

suggest any replacement ?

I shell be very thankfull

.
 

solder iron temperature

You need to use an OA with low voltage up to 6V, rail-to-rail,
Initially was used MCP602
**broken link removed**

try to replace with other circuits. Check if the pinout is compatible, (you need only one OA circuit from multiple) or adjust according datasheets

LMV321, LMV358,
**broken link removed**
LT1366
http://www.linear.com/pc/downloadDocument.do?navId=H0,C1,C1155,C1001,C1158,P1489,D4286?
TS921
http://www.st.com/stonline/products/literature/ds/5560.pdf
LMC6442
**broken link removed**
MC33502
http://www.intusoft.com/onsemipdfs/mc33502.rev5.pdf
MC33202
http://www.intusoft.com/onsemipdfs/MC33201-D.pdf
 

soldering iron schematic

HI,
I was try this and i thing that is the best temp controller for 220V iron and for me.
 
replace lmv321

linoko ! Thanks for your reply

But 404 File Not Found: The File files-eboard/solder-reg_2_1030.rar does not

exist.

Pleas ! Reoupload
 

solder iron temperature control circuit lm358

mister_rf

I find LMV358 in the local market but it did not work properly. It also getting hot

after some time.

I use LM358 but change in the temperature range is to LOW.

Any other suggestion ?:|:|

Mr. linoko please upload gain.

ZIA
 

iron temp controller

Please check your schematics. MCP601/LMV358 power supply is limited to 5.6V by a zenner diode.
MCP601 maximum current drawn is less than 1mA. There’s a 6k8 resistor to connect the output to UAA2016 input.
By the way, how do you have adapted this schematics for 220/230Vac power supply?
 

lmc6442

mister_rf

It is simple I will use MOC30 SERIES OPTO COUPLER in the out put of

UAA2016 .
 

solder iron temperature control schematic

Mr linoko !
Please upload again Your schematic file!
 

uaa2016 schematic

ziaulislam said:
mister_rf
It is simple I will use MOC30 SERIES OPTO COUPLER in the out put of
UAA2016 .
Click to expand...
OK
So how it's connected the 220Vac power supply to the circuit?
 

solder temp controller

Hi Friends,
I'm reuploading the file now
Success for all
 
Reactions: kkluci

    K

    kkluci

    Points: 2
    Helpful Answer Positive Rating
uaa2016

mister_rf I will connected the 220Vac power

supply to the circuit . As shown in the Attachment
 
soldering iron temperature controller schematic

mister_rf Hi !

I think you suggest GOOD circuit.

Thanks !
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…