Bjtpower
Full Member level 5
Dear All
Here i am using a TOP271 for my Project of output 12v 8amp.
it turns on no load giving me a 12.3v output also if i put the load it also draw 8 amp of current.
but if i attached load previously and trying to turn on smps it is not giving output.
Help me with remedy.
- - - Updated - - -
Condition1: If i turn on smps with no load i am getting output 12v then i will have to put the Load of 8 amp it also draws the same.
Condition 2: If i attached load to the output and try to turn on smps it does not Turn on.
WHY this is happening..??
Schematics attached in above post.
Here i am using a TOP271 for my Project of output 12v 8amp.
it turns on no load giving me a 12.3v output also if i put the load it also draw 8 amp of current.
but if i attached load previously and trying to turn on smps it is not giving output.
Help me with remedy.
- - - Updated - - -
Condition1: If i turn on smps with no load i am getting output 12v then i will have to put the Load of 8 amp it also draws the same.
Condition 2: If i attached load to the output and try to turn on smps it does not Turn on.
WHY this is happening..??
Schematics attached in above post.