Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SMPS design - what to consider for power requirements?

Status
Not open for further replies.
S

sunsaini32

Newbie level 3
Newbie level 3
Joined
May 2, 2009
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,298
SMPS design parameter

I have to design an SMPS which will drive the pulsating load. I don't know what to consider for power requirements. Shall I consider the peak curent and design the SMPS for that current or take an average of the pulses and design for the average current. please help me out.
 

Re: SMPS design parameter

i think this depends on the pulse period and pulse duration. If you can deliver peak current with the help of bulk capacitor ,design for the average current . Otherwise you hv to go for peak current design.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top