Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Possibly a BSS63 transistor but it doesn't seem to have any connections to it. Sometimes an inexpensive part is used to calibrate the imaging system on a pick-and-place machine, it could just be there to ensure all the other parts are accurately aligned during assembly. Look on the other side of the board in case there is a hidden via hole under the device.
Possibly a BSS63 transistor but it doesn't seem to have any connections to it. Sometimes an inexpensive part is used to calibrate the imaging system on a pick-and-place machine, it could just be there to ensure all the other parts are accurately aligned during assembly. Look on the other side of the board in case there is a hidden via hole under the device.
Thanks for your answer. I don't think it's a BSS63, because it looks like a FET or a uni-junction when i look at at the signature (ASA) I have two of them and they both look the same. Any other suggestions ?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
