Small Size PCB mount power Relay

panneerrajan · Apr 13, 2015

HI,

My exist device pcb stack have 9mm space only. we need to place small sice power Relay. Relay height should be 8mm.
Specification:
Coil volt:5V
Contact Rate: 230VAC & 24VDC with 1Amps
Type: PCB mount SPST
Application: MD controller (Energy meter) to control Breaker / Contactors.

Any body Know with above spec. pls. suggest me the part no.

Embedded_Geek · Apr 13, 2015

MD controller (Energy meter) to control Breaker / Contactors.

Are you talking about maximum demand here, and cutting-off the load (i.e., household AC supply)

If Yes,
Then I think 1A relay is not sufficient to handle the entire load of a house.

Please check that first.

jiripolivka · Apr 13, 2015

Embedded_Geek said:
Are you talking about maximum demand here, and cutting-off the load (i.e., household AC supply)

If Yes,
Then I think 1A relay is not sufficient to handle the entire load of a house.

Please check that first.

I am afraid there is no such device also meeting safety requirements : 1 A at 230 V means 230 W.

I would suggest you to use a small-size low-voltage relay on PCB, then use a larger relay separated from the PCB for the high load.

Gorgon · Apr 14, 2015

Try this: **broken link removed**

Small Size PCB mount power Relay

panneerrajan

Member level 1

Embedded_Geek

Full Member level 6

jiripolivka

Advanced Member level 5

Gorgon

Full Member level 6

Similar threads

Small Size PCB mount power Relay

panneerrajan

Member level 1

Embedded_Geek

Full Member level 6

jiripolivka

Advanced Member level 5

Gorgon

Full Member level 6

Similar threads

Privacy & Transparency

Privacy & Transparency