SMA Connector specification

Status
Not open for further replies.

aashishsharma

Member level 5
Joined
Jun 26, 2013
Messages
93
Helped
4
Reputation
8
Reaction score
4
Trophy points
8
Visit site
Activity points
683
hey
i am building some RF circuit at 2.4 ghz and want to use SMA connector. Early I used digikey JN02 in my circuit as it was specified in datasheet
https://www.digikey.com/product-detail/en/142-0701-801/J502-ND/35280
but due to shipping time and problem i have to switch to some other company SMA.
i found a couple but cannot say whether they match specification of previous one .
connector mounting,coaxial termination etc I am all confused.here are the other's i found
https://in.element14.com/jsp/search...connector+edge+mount&Ntx=mode+matchallpartial
can anyone tell which one is identical what does different specification means???
thanks in advance
 


For use at 2.45 GHz do not worry, most good connectors can be used without problems. SMA is a standard connector usable up to 18 GHz, precision versions over 20 GHz. For PCB mounted versions take care that the PCB is rigid and cannot be bent. Use a minimum amount of solder.
 

Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…