eric_s88
Newbie level 4
- Joined
- Nov 19, 2013
- Messages
- 7
- Helped
- 1
- Reputation
- 2
- Reaction score
- 1
- Trophy points
- 3
- Activity points
- 56
Hi everyone! happy to joined you in this forum :wink:
I want to have 2 single edge pwm (pwm6 and pwm1) in outputs of lpc2138. but I don't know why I have only one pwm signal!! I mean when I activate them only 1 output generate the signal. I want 2 signals that are inverted and non-inverted
I use IAR as compiler.
in its library I have:
and in the main.c
I want to have 2 single edge pwm (pwm6 and pwm1) in outputs of lpc2138. but I don't know why I have only one pwm signal!! I mean when I activate them only 1 output generate the signal. I want 2 signals that are inverted and non-inverted
I use IAR as compiler.
in its library I have:
Code:
void pwm6_init(void)
{
PWMPR=0x00000DFF;
PWMPCR|=(1<<14);
PWMMR0=0x000000FF;
PWMMCR=0x00000002;
PWMTCR=0x00000002;
PWMTCR=0x00000009;
PINSEL0|=(1<<19);
}
void pwm6_out(us32 value)
{
PWMMR6=value;
PWMLER=64;
}
void pwm1_init(void)
{
PWMPR=0x000003FF;
PWMPCR|=(1<<9);
PWMMR0=0x000000FF;
PWMMCR=0x00000002;
PWMTCR=0x00000002;
PWMTCR=0x00000009;
PINSEL0|=(1<<1);
}
void pwm1_out(us32 value)
{
PWMMR1=value;
PWMLER=2;
}and in the main.c
Code:
void main (void)
{
pwm1_init();
pwm1_out(127);
pwm6_init();
pwm6_out(230);
while(1)
{
}
}