Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Single button startup-shutdown in MCP1640 circuit?

Status
Not open for further replies.
A

aetosa

Member level 3
Member level 3
Joined
Jan 18, 2005
Messages
63
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
546
I 've built an MCP1640 circuit powered by a 1.5V single cell battery. (no microcontroller in the circuit)
I want to start it up and shut it down with a single push button.
But the battery voltage starts from 1.5V and goes down to 0.35V (till the battery gets totally empty).
I was thinking something like this (which definitely won't work with e.g 0.7V battery voltage):

7daa68a2aff7d019b5efcda072eef81e.jpg

What can I do? Do you have any suggestions?
 
Last edited by a moderator:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top