Sine wave generator in proteus

Status
Not open for further replies.

sunil21

Advanced Member level 4
Joined
Dec 2, 2010
Messages
119
Helped
4
Reputation
8
Reaction score
5
Trophy points
1,298
Visit site
Activity points
2,514
I wish to know how to setup 230v source from proteus "Generators " - SINE.

I worked with dc well. now when I click SINE there are three fields to fill.
(I need 230 v ac, 50 hz and also to work with PIC I need 2.30v , 50hz source)



1.offset ?
2. amplitude/peak/RMS ?
3. Frequency (I think this is 50hz);

VSINE also works the same way with the same values ?

I searched in the internet but didn't find a suitable answer.
Kindly answer or point to some valuable links
 

Keep offset zero (0).
Set amplitude = 325V or Peak = (325 x 2)V or RMS = 230V, whichever you like.
Set frequency = 50Hz

Use same properties for VSINE also.
 

    Zeninth125

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…