Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

simulink model for buck converter

Status
Not open for further replies.
A

abbas_0612000

Member level 1
Member level 1
Joined
Jan 4, 2008
Messages
36
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Location
Pakistan
Activity points
1,470
i m interested to model buck converter by simulink.
i want to use digital controller(ADC, compensator,DPWM/DAC);

I WOULD BE THANKFUL IF SOMEONE PROVIDES MATERIAL REGARDING THAT;
MAIN PROBLEM WITH ME TO MODEL DPWM/DAC to get duty cycle to drive the gate.

thanks in advance.
 

Try modeling a triangle wave generator connected to a comparator with a reference voltage. I am pretty sure this can be done with simulink seeing as a comparator is simply an if(a>b) c=1 else c=0 and a triangle is just a ramp. By adjusting the reference "voltage" you can change the duty cycle.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top