si14
Full Member level 3
- Joined
- Sep 27, 2006
- Messages
- 173
- Helped
- 16
- Reputation
- 32
- Reaction score
- 6
- Trophy points
- 1,298
- Location
- North America
- Activity points
- 2,196
Hello to every one.
I want to simulate a UCPBG cell with HFSS.
To obtain the characteristics of the UCPBG cell, the scattered fields (reflection phase) are needed to be known.
Let's see what I've done, then get to the problem:
1) create the ground.
2) create the substrate.
3) create the UCPBG cell.
4) create the Air.
5) define the boundries as:
ground and UCPBG cell as "PEC".
the top face of the Air box as "radiating surface"
the other 4 faces of the Air box are definde as 2 pairs of "master" and "slave".
6) define an excitation:
A plane wave form the bottom (0,0,0)
7) Simulate the project.
!
Now I am wondering how to see the characteristics of this cell.
I mean I cannot see any "reflection phase" term in the:
HFSS --> RESULTS --> CREATE REPORT --> TRACE .
Now what should I do?
(P.S. I see somewhere that a POLYLINE should be definde to see the reflection phase!
Is that correct? If yes, how?)
Thank you for your attention.
I want to simulate a UCPBG cell with HFSS.
To obtain the characteristics of the UCPBG cell, the scattered fields (reflection phase) are needed to be known.
Let's see what I've done, then get to the problem:
1) create the ground.
2) create the substrate.
3) create the UCPBG cell.
4) create the Air.
5) define the boundries as:
ground and UCPBG cell as "PEC".
the top face of the Air box as "radiating surface"
the other 4 faces of the Air box are definde as 2 pairs of "master" and "slave".
6) define an excitation:
A plane wave form the bottom (0,0,0)
7) Simulate the project.
!
Now I am wondering how to see the characteristics of this cell.
I mean I cannot see any "reflection phase" term in the:
HFSS --> RESULTS --> CREATE REPORT --> TRACE .
Now what should I do?
(P.S. I see somewhere that a POLYLINE should be definde to see the reflection phase!
Is that correct? If yes, how?)
Thank you for your attention.