Zay_S
Newbie level 4
Dear edaboardians,
I have four path in my channel when I simulate soft handover. path 1 and 3 are belonging serving cell. while path 2 and 4 are belonging neighbor cell. Serving and neighbor cell have the same DPCH data. how I simulate delay for this path?
My channel is referred to ITU vehicular B, but I take four path only, i.e :
TAP DELAY(ns)
1 0
2 300
3 8900
4 12900
I ever read to simulate delay is done by adding zero. Referring to my scenario, does i have to adding zero in the 2nd path? because this path is come from 2nd transmitter. and how much zero which i have to add, only one or how much?
I'm looking forward for your reply. many thanks in advance.
I have four path in my channel when I simulate soft handover. path 1 and 3 are belonging serving cell. while path 2 and 4 are belonging neighbor cell. Serving and neighbor cell have the same DPCH data. how I simulate delay for this path?
My channel is referred to ITU vehicular B, but I take four path only, i.e :
TAP DELAY(ns)
1 0
2 300
3 8900
4 12900
I ever read to simulate delay is done by adding zero. Referring to my scenario, does i have to adding zero in the 2nd path? because this path is come from 2nd transmitter. and how much zero which i have to add, only one or how much?
I'm looking forward for your reply. many thanks in advance.