Hello every one !!
I use the GSM module SIM900 for the first time. for more than a week i'm trying to send some AT Commands through the Hyper Terminal : Some works and some others just don't !!!
i have the SimCard and the antenna for the SIM900 :
the NETLIGHT led is blinking as to show that the SIM900 finds the network connection (64ms ON / 3000 ms OFF).
the Hyper Terminal is configured to : 115200 bps / one stop bit / no parity / 8 data bits.
(I'm using a USB adaptor and a RS232 cable to connect the SIM900 with PC.)
- when i send "AT" i get "OK"
- when i send "AT+IPR?" i get "+IPR:115200"
- ....
same thing for "AT+GMI", "ATE", "ATI", "ATZ"...it just work !!!
But when i use "AT+CPIN?", "AT+COPS?", "AT+COPN", "AT+CFUN=0", "ATDxxxxxxxx;".... i just get "error" !!!
anyone who could help ???