sreeram25
Newbie level 2
- Joined
- Mar 1, 2013
- Messages
- 2
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,292
Hi,
I connected PWM output (VOUT1 and VOUT2) pins of aP8942A (pre recorded voice) to SIM900 MIC pins via filter circuit.
When I first power on the board and make a call to SIM900 I am not able to listen the voice.
After that if I power OFF and ON the module, I am able to listen the voice.
Reset by using PWRKEY,NRESET is also not helping. Microphone works only after I power off and on module.
To again re-produce the issue, I had to power off the board for 15 mins and then power on.
Regards,
Sreeram
I connected PWM output (VOUT1 and VOUT2) pins of aP8942A (pre recorded voice) to SIM900 MIC pins via filter circuit.
When I first power on the board and make a call to SIM900 I am not able to listen the voice.
After that if I power OFF and ON the module, I am able to listen the voice.
Reset by using PWRKEY,NRESET is also not helping. Microphone works only after I power off and on module.
To again re-produce the issue, I had to power off the board for 15 mins and then power on.
Regards,
Sreeram