Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Reply to thread

Message

hello everyone, I have a sim7090g module which works well, I wanted to add precision to the GPS with A-GPS I followed the simcom procedure: AT+HTTPTOFS="http://xtrapath1.izatcloud.net/xtra3grc.bin","/customer/xtra3grc.bin"
the file is downloaded and present in the sim7090g but when I want to copy it with: AT+CGNSCPY the response is always 1 and not 0: +CGNSCPY: 1 I don't know why it fails, I downloaded from a different server, but that doesn't change anything, any idea of the problem?

[QUOTE="fanfan69, post: 1789464, member: 691759"] hello everyone, I have a sim7090g module which works well, I wanted to add precision to the GPS with A-GPS I followed the simcom procedure: AT+HTTPTOFS="[URL]http://xtrapath1.izatcloud.net/xtra3grc.bin[/URL]","/customer/xtra3grc.bin" the file is downloaded and present in the sim7090g but when I want to copy it with: AT+CGNSCPY the response is always 1 and not 0: +CGNSCPY: 1 I don't know why it fails, I downloaded from a different server, but that doesn't change anything, any idea of the problem? [/QUOTE]

Verification

Welcome to EDAboard.com

Reply to thread

Part and Inventory Search

Connect with us

Online statistics

Forum statistics