SIM700D: What should the min signal quality be for GPRS?

Status
Not open for further replies.

BasePointer

Full Member level 2
Joined
Jul 3, 2002
Messages
130
Helped
6
Reputation
12
Reaction score
3
Trophy points
1,298
Location
TURKEY
Activity points
955
Hi,

What should the min signal quality be for proper GPRS connection?

My SIM700D returns (22,0) for AT+CSQ.

RSSI = 22
BER = 0

Are these values ok?

Code: 
Parameters for AT+CSQ
<rssi>: 0 -113 dBm or less
        1 -111 dBm
        2...30 -109... -53 dBm
        31 -51 dBm or greater
        99 not known or not detectable
<ber> (in percent):
        0...7 as RXQUAL values in the table in GSM 05.08 [20] subclause 8.2.4
        99 not known or not detectable

Also I wonder, can I measure impedance of antenna path at real PCB or Can I detect if there is a mismatch?

10x,
BP.
 

hi
yes the values are OK
U don't need pcb for antenna use a 50 ohm coaxiall cable to transfer signal of antenna
it's better that don't use PCB for this
 

sabeti_1990 said:
hi
yes the values are OK
U don't need pcb for antenna use a 50 ohm coaxiall cable to transfer signal of antenna
it's better that don't use PCB for this
Click to expand...

Thanks but SIM700D is PCB type and doesn't include any socket for antenna. It has just antenna pad. So we need a route between sim700d antenna pad and antenna socket.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…