SIM340C problems with hardware reset

Status
Not open for further replies.
R

Richi

Newbie level 2
Joined
Nov 2, 2007
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,293
sim340c

Hi guys, sorry for my english...I have a problems with SIM340C hardware reset. I have conected a SIM340C with a 8 bit microcontroller and manage POWERKEY and STATUS lines with I/O lines. But I never make a hardware reset, I try with several times in POWERKEY line, but I never detect a low level in STATUS line. Now if I send the AT command CPOWD ( software power-down ) the STATUS lines go to low level.
Thanks in advance !
 

sim340c microcontroller

hi
maybe you configuration in micro's I/O is not correct
use npn transistor between module & micro , it's better
 

Hi, if you are use 5v to supply your microcontroller then you need a 5v in the pin you are sense the STATUS line, and the sim340 only supply 3.6v at STATUS line, use a transistor as sabeti say.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…