Jose Bartra
Newbie
Hello, I'm suffering continuous error about setting grid points
the error code is like that
ATLAS> mesh infile=ath_bjt.str
Error: Error in mesh definition.
Insufficient number of grid points.
And my code about making npn BJT with Athena simulation is down there
my major goal for this code is comparing Ic-Vbe curve with other given base Voltage
and GPT-4 said there's no problem on this code
the error code is like that
ATLAS> mesh infile=ath_bjt.str
Error: Error in mesh definition.
Insufficient number of grid points.
And my code about making npn BJT with Athena simulation is down there
Code:
go athena
line x loc=0 spac=0.15
line x loc=0.8 spac=0.01
line x loc=1.5 spac=0.01
line x loc=2 spac=0.15
line y loc=0 spac=0.01
line y loc=0.5 spac=0.01
line y loc=1 spac=0.15
init orientation=110 space.mul=2
implant phosphorus dose=1e14 energy=100
doping reg=1 gauss p.type conc=5e19 peak=0 char=0.08 x.left=1.5
diffuse temp=950 time=100 weto2 hcl=3
etch oxide all
doping reg=1 gauss n.type conc=5e19 peak=0 junc=0.05 x.right=0.8
diffuse temp=950 time=100 weto2 hcl=3
etch oxide all
save outf=ath_bjt.str
go atlas
mesh infile=ath_bjt.str
electrode name=E x.min=0, x.max=0.8, y.min=0
electrode name=B x.min=0.8, x.max=1.5, y.min=0
electrode name=C x.min=1.5, x.max=2, y.min=0
models ath_bjt
#code about setting different base voltage
structure outfile=ath_bjt_structure.str
tonyplot -overlay.log .log ~~
quitmy major goal for this code is comparing Ic-Vbe curve with other given base Voltage
and GPT-4 said there's no problem on this code
Last edited by a moderator: