torbai
Member level 3
![Member level 3](/styles/images/ranks/dlevel3.gif)
- Joined
- Nov 15, 2011
- Messages
- 67
- Helped
- 15
- Reputation
- 30
- Reaction score
- 13
- Trophy points
- 1,288
- Location
- Harbin,China
- Activity points
- 1,744
Hello all
I'm designing a Class E PA at 13.56MHz. I find that Freescale MRFE6VS25N, which can work from 1.8MHz to 2GHz, is very suitable for my design. https://cache.freescale.com/files/rf_if/doc/data_sheet/MRFE6VS25N.pdf
However, the wide working bandwidth makes a new issue: Will the amplifier be oscillating due to the harmonics which are still in the working bandwidth of the MOSFET?
There is a reference Class C (or Class B) design, whose schematic and layout are both very simple, working at HF frequencies(1.8-30MHz). It appears that the reference design doesn't worry about the harmonics. But should I worry about that in Class E?
I'm designing a Class E PA at 13.56MHz. I find that Freescale MRFE6VS25N, which can work from 1.8MHz to 2GHz, is very suitable for my design. https://cache.freescale.com/files/rf_if/doc/data_sheet/MRFE6VS25N.pdf
However, the wide working bandwidth makes a new issue: Will the amplifier be oscillating due to the harmonics which are still in the working bandwidth of the MOSFET?
There is a reference Class C (or Class B) design, whose schematic and layout are both very simple, working at HF frequencies(1.8-30MHz). It appears that the reference design doesn't worry about the harmonics. But should I worry about that in Class E?