setup hold and transition

Status
Not open for further replies.
R

rdk28

Newbie level 4
Joined
Feb 21, 2014
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
38
Hello all,

Which violation has to give more importance setup , hold or transition comparatively?
 

To work chip properly both violations needs to be fixed. Only thing is if you have setup violation chip will still work properly at lower frequency which not same in case of hold violation.

Posted via Topify on Android
 

Thanx for replay,
I wanted to know more about transition violation. is we have to give preference to transition violation over setup and hold violation? OR hold vioation has to give more priority for fixing as it is independant of frequency?
 

rdk28 said:
Hello all,

Which violation has to give more importance setup , hold or transition comparatively?
Click to expand...

In the First case, Both Violations has to be given importance.

HOLD Violations needs to be taken care in design itself, so you can say the priority .
Set Up Violations can be fixed even after the design by Changing the clock frequency.

For more Information,
http://www.vlsi-expert.com/p/static-timing-analysis.html

Hope it helps
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…