Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

setting up and redesign a server room

Status
Not open for further replies.
A

ashtech

Newbie level 4
Newbie level 4
Joined
Sep 28, 2010
Messages
7
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,323
hi men,
i have a BIG problem with my server room but this is the ONLY site that U can help.
my server system used to go down once there is power failure we have 5KVA inverter + UPS
the servers are 6 in numbers.
this is how i connect it
Main power + Generator ---> inverter ----> UPS ----->Servers
the cabling is 1.5mm that connect from UPS to System(server).
thnak
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top