sesnor connection to GPIB

Status
Not open for further replies.
V

vamsee

Full Member level 1
Joined
Nov 6, 2012
Messages
95
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Visit site
Activity points
1,885
hi,

how to connect 3 pin hall sensor to GPIB?

thanq
 

hi,

i am using HBM MGCplus ML01 DAQ.. i need to connect my hall sensor with this DAQ.. can u help me out?

thanq

- - - Updated - - -

klystron said:
You will need an A2D (analogue data acquisition device) with a GPIB interface
Click to expand...

hi,

i am using HBM MGCplus ML01 DAQ.. i need to connect my hall sensor with this DAQ.. can u help me out?

thanq
 

You need to supply power to the hall sensor (normally 5VDC) and amplify the output to be within the input range sensitivity of the DAQ. The signal level also depends on size of the magnetic signals
 

klystron said:
You need to supply power to the hall sensor (normally 5VDC) and amplify the output to be within the input range sensitivity of the DAQ. The signal level also depends on size of the magnetic signals
Click to expand...

is that possible to power from DAQ to the sensor?

i want to know in which ports should i insert the hall sensor (V+, V- and gnd)
 

Page 8 specify the input characteristics of the DAQ. I do not see a power supply output ?
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…