Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Serpentine stripline trace

Status
Not open for further replies.
R

rikiritesh

Newbie level 1
Newbie level 1
Joined
Jul 31, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
7
Hello Geeks,
I have aTDR measurement system and I want to make a serpentine trace to match the impedance of the air filled coax which is around 54 ohms.
Iam new to RF design and frankly speaking I dont know how to make that trace,so that the impedance is matched with the coax.Freq used is nearly 7Ghz. Please help me to design its my master thesis work.I have jst 2 months left to complete.

Thanks & Regards,
Ritesh Pattnaik.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top