Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Series resonance and/or paralell resonance ?

Status
Not open for further replies.
S

shalky

Newbie level 6
Newbie level 6
Joined
Oct 28, 2005
Messages
13
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,381
I am designing an RFID reader(125Khz). The series resonance circuit is fit to transmit and parallel resonance circuit is good for receive. If I want to use one coil in the reader, how to choose ? The coil current is about 150-200mA, which will make enough energe to transponder. Any suggestions and ideas are helpful.

Thanks!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top