Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

sequencing issue in designing power section in DSP processor for Modem?

Status
Not open for further replies.
M

Mohamed Adam

Newbie level 5
Newbie level 5
Joined
Oct 28, 2013
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
62
Hi guys, i have a problem with power sequencing please help me the problem is , i have DSP processor have three voltages 1.05(core), 1.8(IO), and 1.8(DDR2 controller) i want to generate 1.8V for IOs and DDR2 controller from one regulator the problem is in sequencing between IOs and controller , IOs must power up before DDR2 controller , how i can do this without drop in power (1.8)




thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top