sending sms using arm7

[abhijeet2011]

hi,
i am working on vehicle tracking project. I am using ARM7 microcontroller and Quectel(M10) as a gsm module.I want to send sms.I successfully tested the commands for sending sms by connecting gsm module to hyperterminal of PC.Now i want to write a subroutine for it in c.
So please if anybody know about it, give me hint or give some sample code. Thanks in advance!!!

...........Abhijeet

 

[ckshivaram]

this is written for LPC2129. you can simulate it in keil 3 by running the program and seeing output on serial window 2 for confirmation... there is lot of delay so you need to wait to see the output

in serial window when you see the command
then type ok (IN CAPITAL ) and wait for few seconds to see next command..

so if you can see upto at+cnmi the next routing will send the sms

you need to change the mobile number and compile it again in gsm.c

 

[abhijeet2011]

Thanx for ur help !!! I referred ur code.I made some changes as i am monitoring 4 parameters like oil temp, bat voltage and this information with location will be sent to server. Thank u ones again!