Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Sending digits thru USART

Status
Not open for further replies.
A

asham

Junior Member level 1
Junior Member level 1
Joined
Jan 24, 2006
Messages
19
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Visit site
Activity points
1,454
Hi everybody!! i'm working on a program that transmits numbers to the pc hyperterminal(usart)...The input is from the hardware (PICDEM PLUS 2), as the hardware receives data, it should transmit it to the hyperterminal...I'm using mplab ide w/ C18 compiler to write this program (it'a must).The chip i'm using is PIC18F452...i have very poor knowledge in c language. My project deadline is nearing, any help will be very much appreciated. I jus need a sample program that works or atleast some tips. Thank you all....:cry:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top