Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

schematic tracer in simvision

Status
Not open for further replies.

kadhan

Junior Member level 2
Junior Member level 2
Joined
Apr 7, 2009
Messages
24
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,416
simvision design browser

How can we see the schematic of a verilog code in simvision.?

Regards,
Kad.
 

kadhan said:
How can we see the schematic of a verilog code in simvision.?

Regards,
Kad.
if you want view only schematic you can try to use rtl-compiler, for example: rc +gui [verilog-file].

but how you can compile your project and load it into simvision i don't know.
 

You can select a signal either in the design browser or in the waveforms window. Then press the schematic browser window, A schematic window will open showing the portion of the schematic having the signal that you have selected. In order to expand the schematic , double-click on any net in order to show all blocks connected to it.
 

    kadhan

    Points: 2
    Helpful Answer Positive Rating
Ok... it works...
Thanks for ur reply....
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top