xReM1x
Member level 5
- Joined
- Mar 25, 2014
- Messages
- 83
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 6
- Activity points
- 586
Hi, I have a psu that can supply 10A and 24V.
I've used a buck convertor I bought from eBay, and it worked great I could adjust the output voltage, and I could short it no problem, until I shorted once and the dc-dc chip just blow off to 2 pieces. I tried googling the part number, its crappy generic cheeinse dc-dc convretor that I could only order on eBay, and there is no way I'm buying this crap again, + I dont want to wait 30days for it to arrive.
So I tought maybe I could build my own, and see how it goes.
as basically Input voltage of at least 24V, that I can adjust from at least 1V to 20V 10A, very stable that could handle short outs :grin:.
I've used a buck convertor I bought from eBay, and it worked great I could adjust the output voltage, and I could short it no problem, until I shorted once and the dc-dc chip just blow off to 2 pieces. I tried googling the part number, its crappy generic cheeinse dc-dc convretor that I could only order on eBay, and there is no way I'm buying this crap again, + I dont want to wait 30days for it to arrive.
So I tought maybe I could build my own, and see how it goes.
as basically Input voltage of at least 24V, that I can adjust from at least 1V to 20V 10A, very stable that could handle short outs :grin:.