Save currents in spectre

Status
Not open for further replies.

Shurik

Full Member level 3
Joined
Jul 15, 2004
Messages
166
Helped
16
Reputation
32
Reaction score
4
Trophy points
1,298
Activity points
842
Hello !!!
Can who offer decision of the problem?
I cannot save the currents of circuit in spectre of Affirma!
I select in "Save all" - save currents all !
On all the trys displayed of results in WaveScan, The CIW printed ->

astiCancelSelect(hiGetCurrentWindow())
*Warning* no "IT" data for node "/M0/D"
 

You can select the results you want to plot before the simulation...a roundabout way though!! Outputs>To be Plotted > Select on Schematic....would be better if u can send a snapshot oof the window though!!
 

try putting a 1u Ohm resistor and read the current from it , this happens a lot in spectre in some PDKs
 

Select >
Outputs>To be saved > Select on Schematic.
and save the wires u want
 

safwatonline said:
try putting a 1u Ohm resistor and read the current from it , this happens a lot in spectre in some PDKs
Click to expand...

you can put a vdc=0 which also means a shorted wire and measure current
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…