Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Saber software learning tips help!

Status
Not open for further replies.
W

weisuer

Newbie level 3
Newbie level 3
Joined
Aug 8, 2005
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,299
I/m just getting started to learn saber designer on the power electronics application, and some problems blocked me to moving forward. I've beening using PSPICE for a while. I am wondering how can I write the MAST template and use the netlist method to run a simulation, just like what people do in pspice (writing your own netlist and your own subckt. files to run the simulation). seems that the saber document did not give such information on the operation steps.

Anyone know how to do that? I would much appreciate your help! Thanks!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top