Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

S8050 NPN or PNP Transistor

Status
Not open for further replies.

tahir4awan

Full Member level 4
Full Member level 4
Joined
Nov 29, 2010
Messages
213
Helped
16
Reputation
32
Reaction score
17
Trophy points
1,308
Location
Germany
Activity points
3,116

My guess is that it is NPN. The way the values are quoted in the Wing Shing data sheet are not how PNP values are usually specified. Most voltages and currents would be specified as being negative.

Keith
 
S8050 is in all respects an NPN transistor
there is a blunder in your datasheet from the Wing Shing manufacturer
The complimentary is the S8550 which is a PNP transistor
I have used these transistors a lot
 
The WS datasheet may be flawed. But isn't it also possible that WS makes S8050 PNP transistor (even though the values aren't quoted as they should be)?
 
If you have the device. As long as the part is not completely ruined. There is a chance that you can measure the EB o CB junction to be sure. Otherwise you can see how it is connected and biased on the circuit that uses it. Either with the schematics or doing a little of reverse engineering.
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top