S1D13506 Programming Grpaphic LCD

[Blubb]

s1d13506

Hallo,

do somebody have usefull Information about the Programming
of this Graphic Controller 13506 from Epson. 8O 8O

I like to Interface a Passive Pannel with a resulution 640 x 480.

Do somebody have some Tools or Alications for the Programming.
I Know the APP on the website below

BY

Blubb


**broken link removed**

 

[tcsa35]

s1d13506

Look below
**broken link removed**

there are Programming Notes and Examples
source code for 4/8/16 bit-per-pixel driver under linux, wince and more ......

Init13506.c sample source as referenced in the Programmer's Notes and Examples
for download

Enjoy

 

[Ajay]

s1d13506 driver

Frankly, given a choice, I would not use the S1D13506 external LCD controller for a 640x480 due to the wait states needed to access the controller RAM. It tends to be very slow. Cause of the problem is the 70 ns RAM on these controllers.

You can consider an ARM controller (Sharp/Samsung/Xscale) which come with built in controlers and use a high speed RAM. The results are much better.

Ajay