RHEL 4 and IC610 install issue (installscape problem)

[jelydonut]

installscape

Does anyone know how i fix this? I get no GUI and it just goes to command line.

Extracting InstallScape version
for platform lnx86 in /opt/InstallScape
./SETUP.SH: line 814: uncompress: command not found


Starting up InstallScape in GUI mode

DISPLAY environment variable is set to :0.0

If you do not see the InstallScape console
window or the it seems to be hanging then kill this
process.

Set your DISPLAY environment variable to a proper
value and manually start InstallScape by typing:
/opt/InstallScape/iscape/bin/iscape.sh /opt/cadence/IC610_lnx86.Base/CDROM1:::/opt/IC610

Thanks

jelydonut

 

[adsl]

ic610 install

You need to install ncompress package.

 

[cougar168]

edaboard ic610 install

First, you need to install uncompress
2nd, you need to install InstallScape

By the way, the IC610 installation time is very long

 

[mars64]

ic610 installation

u may make so
ln -s gzip compress
ln -s gunzip uncompress

 

[edacw1]

how to install uncompress on rhel

download the uncompress rpm package from internet and install it. and then your problem can be addressed.

 

[semikon]

install ic610 on centos 4

rt,you should install the program "ncompress",you can find it in ur CD/DVD ROM

 

[III]

install installscape

why not edit the setup.sh file and replace every instance of uncompress with ungzip (as gzip has full read support for ncompress *.z compressed files), allso if you're installing as a diferent user like root first in a console execute the command
(user@linux>xhost +) wich wuld allow evry user to gain acces to the x server othervise some gui setups might faill if you run them as root

 

[keenboyee]

installscape download iscape.sh

run ln -s /bin/gunzip /bin/uncompress

Added after 3 minutes:

run ln -s /bin/gunzip /bin/uncompress

 

[shockie]

installscape download

Is there any easy way to install ic610 without Installscape. like previous version, only using softload?

 

[tjjbraye]

uncompress command rhel

maybe softload 6.0 can work.i have tried,but failed with mount point err.

 

[wmbasslake]

ncompress rhel download

the softload program is no longer supported

 

[kk2mkk]

install error ic610

$ ln -s /bin/gunzip /bin/uncompress

the above solution worked
thanks all

 

[manish12]

installscape

it works ,what about DISPLAY ?

 

[manish12]

red hat enterprise linux ic610

for config licence.dat needed ??

 

[nasatask]

installing installscape

turn to RHEL 5 or higher seems good to your problem.

 

[jimjim2k]

installscape download latest version

run ln -s /bin/gunzip /bin/uncompress

Added after 3 minutes:

run ln -s /bin/gunzip /bin/uncompress

Hi

as root run:

#cd /bin
#ln -s zcat uncompress



tnx

 

[lohi21]

Sir,

I am having this problem while installing on fedora 7. Plz help me with this error

Detecting InstallScape for lnx86...
Checking InstallScape on media...
/bin/tar: Skipping to next header
/bin/tar: Archive contains obsolescent base-64 headers
/bin/tar: ./iscape/VERSION.lnx86: Not found in archive
/bin/tar: Error exit delayed from previous errors
/bin/cat: /tmp/is3276/iscape/VERSION.lnx86: No such file or directory

Extracting InstallScape version
for platform lnx86 in /cad/is
Could not install InstallScape in /cad/is

You must have write permissions to /cad/is
There must be atleast 80 MB of disk space available in
/cad/is

/bin/tar: Skipping to next header
/bin/tar: Archive contains obsolescent base-64 headers
/bin/tar: Error exit delayed from previous errors
Exiting...

 

[III]

You must have write permissions to /cad/is
There must be atleast 80 MB of disk space available in
/cad/is

Are you running the install as root ?
do a su or sudo prior to the installation

 

[lohi21]

[root@localhost soc]# ./SETUP.SH

Copyright 1985-2006 by Cadence Design Systems Inc.


Specify path of install directory [OR type [RETURN] to exit]: /cad

Detecting InstallScape for lnx86...
Checking InstallScape on media...
/bin/tar: Skipping to next header
/bin/tar: Archive contains obsolescent base-64 headers
/bin/tar: ./iscape/VERSION.lnx86: Not found in archive
/bin/tar: Error exit delayed from previous errors
/bin/cat: /tmp/is3276/iscape/VERSION.lnx86: No such file or directory

Could not detect an InstallScape for lnx86 platform using the PATH environment variable

You are on lnx86 platform
InstallScape version
for platform lnx86
is available on this CD.

Do you want to install InstallScape for lnx86[y/n]:y

It is recommended that you install InstallScape
outside the Cadence installation hierarchy
and include the ~iscape/bin in your PATH environment variable.


Type the path to InstallScape installation directory [ (q to quit)]: /cad/is

InstallScape installation directory: /cad/is

Extracting InstallScape version
for platform lnx86 in /cad/is
Could not install InstallScape in /cad/is

You must have write permissions to /cad/is
There must be atleast 80 MB of disk space available in
/cad/is

/bin/tar: Skipping to next header
/bin/tar: Archive contains obsolescent base-64 headers
/bin/tar: Error exit delayed from previous errors
Exiting...
[root@localhost soc]#

I was installing this as a Root and I have trieved downgrading the tar, that also resulted in same error.
Tried with fedora 7, 8, Ubuntu 9, Mandriva 2009, and slackwire. Nothing could actually solved this.

 

[hungthientu]

i complete insatll ic610 and 613 on RHEL 5.4(Tikanga) and mmsim61

but when i run icfb& or virtuoso
error:

e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1655
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1656
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1657
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1658
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1659
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1660
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1661
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1662
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 2 error 3 serial 1663
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 2 error 3 serial 1664
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 2 error 3 serial 1665
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 2 error 3 serial 1666
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1667
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1668
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1669
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1670
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1671
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1672
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1673
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1674
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1675
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1676
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1677
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1678
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1679
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 2 error 3 serial 1680
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 18 error 3 serial 1681
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 18 error 3 serial 1682
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 18 error 3 serial 1683
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 18 error 3 serial 1684
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1685
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 12 error 3 serial 1686
\e Display :0.0 Error "BadMatch (invalid parameter attributes)"
\e request 62 error 8 serial 1696
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 20 error 3 serial 1697
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 18 error 3 serial 1699
\e Display :0.0 Error "BadWindow (invalid Window parameter)"
\e request 18 error 3 serial 1706
..................

can hefp me,thank you very very much