Can someone suggest an RFID UHF dipole antenna designer in 2d? I did design in HFSS/CST and it works well, but looking for similar in a 2d environment.
ADS/microwave office does offer microstrip/CPW and other solutions, yet I need the ground layer to be removed.
Planar transmission line problems can be analyzed in 2D solver if coupling to free field (e.g. radiated wave) can be neglected. An antenna problem is 3D by nature and needs a 3D EM solver.
Planar transmission line problems can be analyzed in 2D solver if coupling to free field (e.g. radiated wave) can be neglected. An antenna problem is 3D by nature and needs a 3D EM solver.
thank you for your response. You are correct about the 3d environment. However, modeling in 2-D first would at least help me with chip matching, and generally it is easier to draw in a 2d environment using the on-board palettes interface.