RFID Build Enviroment

[mackiecampbell]

Hey Guys

I am new to the area of this type of development.

Pretty much what i want to create is an environment where i have a series of RFID tags with an associated value which never changes and a series of receivers also with a value that never changes and when a tag matches with a receiver i want that data to be sent wirelessly to a computer near by and present the data of what values are paired together'


Any ideas if this can be done and what is required ?

Cheers

CM

 

[u7karsh]

You can get RFID tags that have a constant value. But I have never heard of a reader with an ID system. To solve this problem, what we can do is that we buy many RFID tags.. and all have a unique ID that is in the hardware and cannot be changed. You then have to bind a microprocessor at every reciever and need to program an ID into it using software. Mind it this ID may be subject to change on burining a new program with a different hardcoded ID. You can then easily do the remaining part using XBEE by creating a network.

Utkarsh Mathur