gecky
Full Member level 2
Hi,
I have designed a relection, common source FET DRO at 6GHz. Making use of the existing design, I need to design for a RF (5Mhz) feed to convert the DRO into a self-oscillating mixer.
I need some advice on how I can acheive RF input matching without affecting the oscillator.
All the papers I found use SOM for down-convertion so the RF feed is straight forward using coupled lines. The does not work for my case since my RF<<LO
Many Thanks!
I have designed a relection, common source FET DRO at 6GHz. Making use of the existing design, I need to design for a RF (5Mhz) feed to convert the DRO into a self-oscillating mixer.
I need some advice on how I can acheive RF input matching without affecting the oscillator.
All the papers I found use SOM for down-convertion so the RF feed is straight forward using coupled lines. The does not work for my case since my RF<<LO
Many Thanks!