Genovator
Advanced Member level 2
- Joined
- Dec 19, 2011
- Messages
- 550
- Helped
- 87
- Reputation
- 174
- Reaction score
- 84
- Trophy points
- 1,328
- Location
- India
- Activity points
- 4,632
Hi..
Here is the link of a 455KHz resonator...
https://pdf1.alldatasheet.com/datasheet-pdf/view/464500/LUGUANG/CRB455E.html
In the test circuit design, it is shown that two capacitors C1 & C2 are connected with resonator with respect to ground, and a 1M resistor is connected in parallel. I wanted to know whether these components are already included in the resonator, or I have to connect them by myself? And what about the 2 NOT GATE ICs shown there??? I want to use this resonator with a 8051 uC as an oscillator/clock.
Any suggestion and/or a schematic reference will be very helpful so that I can be sure how 'exactly' I have to use the resonator to get the proper clocking. I have used crystals a lot, but never used a resonator before....
Thanks...
Here is the link of a 455KHz resonator...
https://pdf1.alldatasheet.com/datasheet-pdf/view/464500/LUGUANG/CRB455E.html
In the test circuit design, it is shown that two capacitors C1 & C2 are connected with resonator with respect to ground, and a 1M resistor is connected in parallel. I wanted to know whether these components are already included in the resonator, or I have to connect them by myself? And what about the 2 NOT GATE ICs shown there??? I want to use this resonator with a 8051 uC as an oscillator/clock.
Any suggestion and/or a schematic reference will be very helpful so that I can be sure how 'exactly' I have to use the resonator to get the proper clocking. I have used crystals a lot, but never used a resonator before....
Thanks...