binojkumar
Full Member level 3
- Joined
- Jul 19, 2004
- Messages
- 151
- Helped
- 2
- Reputation
- 4
- Reaction score
- 1
- Trophy points
- 1,298
- Location
- Bangalore
- Activity points
- 983
i have P89LV51RD2 with ICL3232 serial support(3v). The ISP programming is working but some times it shows error "Unable to communicate, failed to auto baud". if i try again for 3 or 4 times it will work.
In the reset circuit i use 10 06 8.2k resistor with 10uf capacitor. Crystal 27 mhz.
what could be the problem? pls help
In the reset circuit i use 10 06 8.2k resistor with 10uf capacitor. Crystal 27 mhz.
what could be the problem? pls help