Require 16 to 24-bit ADC with UART output

DatsAbk · Jan 20, 2013

Hello,
I tried working with a 24-bit ADC AD7714 which has got a SPI output.But was unsuccessful.I'm henceforth looking ahead for an ADC which gives output by UART and has a resolution of 16-24 bits.

Kindly revert soon if anyone has a knowledge on this...

Thankyou in advance.

wp100 · Jan 20, 2013

Hi,

I2C or SPI do seem to be the standard output method for such devices.
Microchip support a range https://www.microchip.com/ParamChartSearch/chart.aspx?branchID=11022&mid=10&lang=en&pageId=79

You do not mention what micro and complier you are using and why you could not get the AD7714 to work ?

Also have to question why, for a diy user, you cannot use a typical Pic micro with an inbuilt 10 bit adc ?

Kripton2035 · Jan 20, 2013

adc have i2c, spi or parallel outputs. I dont know of an adc that have an uart output.
you could make one with a pic with inbuild adc, and uart output
but if you cannot make an ad7714 to work in spi, I'm not sure you will be able to make that adc-uart pic based device.
please describe why you cannot use tha ad7714 and may be we can help you.

Require 16 to 24-bit ADC with UART output

DatsAbk

Member level 3

wp100

Advanced Member level 6

Kripton2035

Advanced Member level 4

Similar threads

Require 16 to 24-bit ADC with UART output

DatsAbk

Member level 3

wp100

Advanced Member level 6

Kripton2035

Advanced Member level 4

Similar threads

Privacy & Transparency

Privacy & Transparency