Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Remote NDIS and NDIS miniport?

Status
Not open for further replies.

Niver

Junior Member level 3
Junior Member level 3
Joined
Oct 11, 2001
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
224
Hi all,

I´m starting the develop the software connection of an external Ethernet device (with a Infineon C161U) to a USB port of a Windows Host PC.

The best practice seems to be implement the Microsoft RNDIS protocol. Is there any person with experience or C source code of RNDIS for ANY uC?

Another old solution was to try the connection using Miniport NDIS in the Windows side...any examples about this will be very helpful too. I've been searching in google, but there was only a cached web page with open source drivers for the Freebox network device, and the files didn't be there.

Thanx in advance!
 

For information about NDIS, look:
h**p://w*w.pcausa.com/
 

Thank you dainis, but I knew that link. I'm specially interested in a C program for ANY uC that implements the RNDIS in the network device.

Thanx in advance!
 

u can do that by a NDIS miniport driver with USB loweredge interface, i think i can give information to develop this

indy
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top